CAN-Bus I/O Module: 4 analog Outputs

Article selection:

1pc net: on request
1pc gross: on request

Downloads ∇

Text documents	Version	Size	Download	Watch
Datasheet 4 analog Ouputs	V01	-	Download	-
CAN-Bus Library	V1.01	-	Download	-

Downloads to all products you can find in the download-center:
Cancel Downloadcenter

Control I/O Modules via CAN-Bus

CAN module wit 4 analog outputs. Suitable as encoder for regulating variables for e.g. electrical vent and mixing valves, valve positions etc. FAA 4 field bus modules are output modules for universal use and are addressed by the CAN Bus. The module is activated by an adjustable address (1 ... 99) and the data bytes transmit the status of the outputs. If an analog input module with the same address is integrated to the system, the voltage measured at this module is issued at the respective output.

Features:

output 4 x analog output
(c)CiA standard 2.0B passive
cabling two-wire bus with potential balance line in bus or line topology
transmission rate 20 to 500 kBits (factory setting 125 kBits)
dimensions W x H x D 35 x 70 x 65 mm
supply and bus pluggable terminal block 1.5 mm² (terminal block and jumper plug are included to each packing unit)
operating voltage range 20 to 28 V AC/DC
current consumption 90 mA (AC) / 32 mA (DC)
output voltage 0 to 10 V DC
nominal current 5 A
resolution 10 mV
operating temperature -5 °C to +55 °C
storage temperature -20 °C to +70 °C
operation and bus activity green LED
failure signals red LED
output status yellow LEDs