For companies and authorities only - no distribution to private persons!

CAN-Bus

CAN-Bus – The solution for operational safety and connected systems. It is impossible to imagine vehicle technology and many other areas without CAN-Bus. The products that are presented here enable your application to access these systems.


Products

Products - CAN-Bus

TINY-Tigerâ„¢ 2 Multitasking Computer

The Multitasking Controller from the Tiny Tiger 2 Series provide high-grade compability and:

1pc net: on request   
1pc gross: on request

Artikelauswahl:

CAN-Bus I/O Module: 4 digital Inputs

Control I/O-Modules via CAN-Bus

CAN module with 4 digital inputs to be used as contact or voltage inputs. The module is suited to record switch states, for example at electrical limit switches of vent valve or auxiliary contacts of contactors. The FDE 4 field bus modules are input modules for universal use and are connected via the CAN Bus to other modules or a bus master.

1pc net: on request   
1pc gross: on request

Artikelauswahl:

CAN-Bus I/O Module: 4 digital Outputs

Control I/O Modules via CAN-Bus

CAN module with 4 digital outputs. Suitable to switch electrical components such as motors, contactors, lamps, blinds etc. For high inductive loads it is recommended to protect the relay contacts additionally by a RC element. FRAS 4/21 field bus modules are output modules for universal use and are addressed by the CAN Bus.

1pc net: on request   
1pc gross: on request

Artikelauswahl:

CAN-Bus I/O Module: 4 Temperature- and 4 Voltage Inputs

Control I/O Modules via CAN-Bus

CAN module with 4 temperature and 4 voltage inputs. The module is suited to record temperatures with Ni1000 or Pt1000 sensors as well as voltages of e.g. electrical vent and mixing valves, valve positions etc.

FAE 4 field bus modules are input modules for universal use and are addressed by the CAN Bus.

DIP switches allow to adjust each input to either 0 to 10 V DC, Ni1000 (-50 °C to +150 °C), Pt1000 (-50 °C to +150 °C) or Pt1000 (0 °C to +400 °C). Features

1pc net: on request   
1pc gross: on request

Artikelauswahl:

CAN-Bus I/O Module: 4 analog Outputs

Control I/O Modules via CAN-Bus

CAN module wit 4 analog outputs. Suitable as encoder for regulating variables for e.g. electrical vent and mixing valves, valve positions etc. FAA 4 field bus modules are output modules for universal use and are addressed by the CAN Bus. The module is activated by an adjustable address (1 ... 99) and the data bytes transmit the status of the outputs. If an analog input module with the same address is integrated to the system, the voltage measured at this module is issued at the respective output.

1pc net: on request   
1pc gross: on request

Artikelauswahl: